What is Pulp Molding Process of Molded Pulp Packaging?

Сайт pulp molding process is a manufacturing technique used to produce molded pulp packaging—a sustainable and eco-friendly alternative to traditional packaging materials like plastic or Styrofoam. This process involves converting fibrous raw materials into packaging products, such as sugarcane bagasse, recycled paper, cardboard, or natural fibers. These products are biodegradable, compostable, and recyclable, making them a popular choice for environmentally-conscious industries.

As a well-known Chinese molded pulp packaging manufacturer, Bioleader has focused on the pulp molding process for more than 10 years. This article introduces a complete production process for making disposable pulp tableware based on sugarcane bagasse pulp material.

Закупка и подготовка сырья

The quality of molded pulp packaging produced depends on the quality of sugarcane bagasse procured. The bagasse collected is transported to the manufacturing facility and stored there in a controlled environment to avoid deterioration.

Доска из сахарной целлюлозы

Для улучшения яркости или белизны целлюлозы и некоторых содержащихся в ней ингредиентов может быть использовано контролируемое отбеливание без вторичных диоксинов (SDET). После этого целлюлоза просеивается, чтобы избавиться от возможных загрязнений и получить конечный продукт хорошего качества. В данном случае после обработки влажных волокон сахарного тростника получился продукт в виде плит из сахарной целлюлозы для удобства хранения и транспортировки.

Процесс целлюлозы

Сахарная целлюлоза измельчается и тщательно промывается, чтобы удалить грязь и все другие неволокнистые материалы. В этом процессе используются сложные машины, которые просто разбивают жом на сырую целлюлозу, которая становится гладкой.

Внесение добавок

Многие добавки тщательно подбираются и включаются в целлюлозу для улучшения определенных характеристик посуды, таких как водостойкость, прочность и гибкость. Включение этих добавок определяется их консистенцией с целлюлозой, а также способностью разлагаться после использования, чтобы сохранить экологическую чистоту продукта. На данный момент мы внедрили фторид-барьерные покрытия для воды и масла.

Формовка, горячее прессование и профилирование

To make tableware such as plates, bowls, and food containers of different shapes and sizes, the machine compressed the blended pulp mass into a special column that contained sets of plates, wherein each plate had a recess containing desired shapes.

The main pulp molding processof this step: The molding procedure uses compression and heat to shape the pulp material according to the formed mold, which helps to achieve the required finish that is smooth and fine. The tableware is then exposed to a controlled drying operation whereby excess moisture critical for the structure of the product is removed by heating and dehydration built into the machine’s bulk.

Drying

The wet molded product is transferred to a drying station, where it is heated to remove moisture. Drying methods include oven drying, infrared drying, or natural air drying, depending on production scale and efficiency needs. (This step is usually connected to the previous step).

Обрезка кромок

There are currently two main types of machines prevailing on the market. one is a fully automatic machine that doesn’t have any trimming operations – towards the end of the pulp molding process the required product shape is achieved by direct trimming of the edges on the molding machine Sullivan…. The mold is fitted around the still plastic products and a scraper is used to clean the edges of the molded articles to which various fine trims of little specifications are obtained for the molded pulp packaging products.

Обработка поверхности и отделка

To improve the usability and aesthetic of the tableware, other than food-grade water and oil-resistant coatings on the articles, additional surface treatments are also carried out. The finishing pulp molding process will also include giving soft surfaces, edge rounding out, surface polishing, and placing permissible foods and hygienically acceptable decorations.

Инспекция, обеспечение качества и контроль

Bioleader’s strict quality control measures are also taken at all stages of production to guarantee that the tableware will be of international standards regarding safety, eco-friendly, and resilience. Each molded pulp packaging product undergoes both manual and machine inspection whereby all flaws, accurate shapes and measurements as well as adherence to the design are ensured.

Обнаружение металла

Sometimes the screen wires might break and mix up with the product due to the use of a metal pulping screen in the product molding process. Hence, all the items made by Bioleader are metal tested to eliminate any metal parts leaking from the machine that could blend with the completed output.

Испытания на водо- и маслостойкость

Most of our products are for disposable tableware use and thus need to be resistant to water and oil. Since these are plastic products, we sample some pieces of each batch to test whether they leak and soak the samples in water and oil for 6 to 12 hours.

Упаковка и брендинг

There is a need for molding and packaging tableware for them to withstand the rigors of transportation and storage. The use of molded pulp packaging materials is of mind for the eco-friendly concept and the design is simple and easily disposable because of the nature of the product.

Хранение готовой продукции

Порядок при организации упакованной продукции на нашем складе обусловлен существующими системами складирования продукции, которые необходимо соблюдать в ожидании экспортных контейнеров.

Export, Distribution, and Market Access

Containers are loaded and cargo ships set sails on directives issued by the buyers for exports. The finished molded pulp packaging tableware is kept in quality preservation conditions to avoid alteration in quality and then sold in the different explored markets. The perspective of the marketing communication is aimed at persuading households to accept the use of tableware made of sugarcane bagasse through advocacy on its ecological benefits.

Benefits of the Pulp Molding Process

·  Экологически чистый: Reduces reliance on plastic, minimizes waste, and uses recyclable and biodegradable materials.

·  Универсальность: Can produce a wide range of products for different industries, including food, electronics, and healthcare.

·  Экономически эффективный: Utilizes inexpensive raw materials and is energy-efficient.

·  Настраиваемый: Molds can be designed for specific product requirements, offering flexibility in shapes and sizes.

This process is an essential part of creating sustainable packaging solutions, aligning with global efforts to reduce environmental impact.